Conest vs STACK Takeoff: Electrical or Multi-Trade? | V2 Cloud

Buying guide: comparison · October 2026

Conest vs STACK Takeoff: should you pick an electrical specialist or a multi-trade platform?

Conest IntelliBid and STACK both turn drawings into bids, but they are built for different contractors. IntelliBid is an electrical estimator with National Electrical Code (NEC) material data, prebuilt assemblies and electrical labor units, paired with Conest’s SureCount takeoff. STACK is a browser-based takeoff and estimating platform for contractors across every trade. Neither one wins outright. This guide compares scope, price, reviews and Mac access, then shows how each behaves when estimators work from different offices, so you can choose by the work you actually bid.

This guide is based on vendor documentation, published pricing and independent reviews checked 13 October 2026, and Conest is a V2 Cloud partner (see the disclosure at the end).

V2 Cloud dashboard

The short answer

All buying guides › Electrical estimating software › Conest vs STACK

Direct answer

Choose Conest IntelliBid if electrical work is all you bid. It ships with more than 140,000 NEC-friendly material items, more than 500,000 prebuilt assemblies and preinstalled electrical labor units, none of which STACK publishes. Choose STACK if you are a general contractor or multi-trade shop that wants one browser-based tool for takeoff and estimates across every trade, with published pricing from $299 per user per month billed annually. A multi-trade contractor may be better served by STACK. Only an electrical specialist should pick Conest.

This page answers the Conest vs STACK Takeoff question for contractors deciding between depth and breadth. For six electrical estimators side by side, read our full electrical estimating software guide, or see the sibling comparisons Conest vs Accubid and Conest vs McCormick.

Side by side

Conest IntelliBid STACK Takeoff & Estimate
Trade scope Electrical only: built for electrical, low voltage, datacom and solar contractors Multi-trade: takeoff and estimating for construction contractors in any trade
Deployment Installed on a local PC or office network, or CE Cloud (Conest’s hosted edition, which runs on V2 Cloud) Cloud-based and browser-run; nothing to install
Licensing and price Not published; quoted by edition (Standard, Plus, Pro) and number of users after a demo Free tier (7 days of Pro, then 1 active project a month); Premium $299 and Pro $349 per user per month, billed annually on 12-month terms
Database or core capability More than 140,000 NEC-friendly material items, more than 500,000 assembly kits, preinstalled labor units with Auto Labor Factoring General item and assembly library; regional cost library on Pro. No electrical code database or electrical labor-unit library found
Takeoff SureCount, a separate product: symbol counts, point-and-click runs, Overlay for revisions; feeds IntelliBid directly Built in: plan markup, drawing version overlays, AI Takeoffs
Multi-office CE Cloud gives every office the same hosted environment; a local install needs remote access to one office Native: every user signs in to the same cloud account
Mac access Through CE Cloud from Mac, Chromebook, iPad and Android tablets Safari 26 on macOS Tahoe, Sequoia or Sonoma; the STACK Field App does not run on Macs
Independent reviews Capterra 4.6/5 (24 reviews) Capterra.ca 4.5/5 (1,395 reviews)
Best for Electrical contractors who want code-aware assemblies and labor data out of the box General contractors and multi-trade shops that want one tool across trades

V2 Cloud partner products: Conest IntelliBid, SureCount and CE Cloud. STACK is not a V2 Cloud partner. Ratings and prices as published on 13 October 2026; third-party listings show different STACK prices, explained below.

Where they differ

Conest vs STACK Takeoff on scope: one trade or every trade

Scope is the real divide. Conest describes IntelliBid as built for electrical, low voltage, datacom and solar contractors, from small shops to large multi-crew operations, and every part of the product assumes the person at the keyboard bids electrical work. STACK assumes the opposite.

Capterra describes STACK as cloud-based takeoff and estimating software for construction contractors, with nothing tied to a single trade. The company has widened that footprint by acquisition, buying the Quebec document collaboration company SmartUse in June 2021 and then Bid Retriever and K-Ops, announced on 29 March 2022. Breadth is the product.

History points the same way. Conest dates to 1989 and has belonged since March 2017 to JDM Technology Group, a group of architecture, engineering and construction (AEC) software companies. STACK, founded in 2008 according to CB Insights and based in the Cincinnati area, reaches into enterprise resource planning (ERP) through integrations with QuickBooks Desktop and Online, Sage Intacct, Sage 300 and Acumatica, plus a May 2025 partnership with the Sage reseller SWK Technologies.

Estimating data: NEC assemblies and labor units against a general library

IntelliBid’s advantage is data an electrical estimator would otherwise build by hand. Conest’s product page lists more than 140,000 NEC-friendly material items, more than 500,000 prebuilt assembly kits, and manufacturer-specific items from brands including Leviton, Hubbell, Siemens and Panduit. Labor comes preloaded too.

Those labor units ship installed, with six levels of labor difficulty and Auto Labor Factoring that adjusts for installation height, floors, run length and quantities. The Plus edition adds Smart Substitution, which swaps items while checking them against the latest National Electrical Code. An Electrical Formulas add-on calculates voltage drop, NEC Article 220 services and feeders, fault current, conduit fill and box fill. Supplier pricing comes through NetPricer, EPIC and TRA-SER, licensed separately, which compare prices across up to 10 local suppliers.

STACK’s estimating layer is general by design. Its Pro tier adds worksheet-style estimating, labor and material estimates built from items and assemblies, a regional cost library, missing-materials detection and STACK for Excel®. We found no NEC code database or electrical labor-unit library anywhere in STACK’s published pricing or reseller material, so an electrical estimator on STACK builds those assemblies and labor rates themselves.

STACK prices every trade; IntelliBid prices one trade in depth.

Takeoff tilts the other way. STACK keeps takeoff in the same browser window as the estimate, with plan markup, drawing version overlays and AI Takeoffs. Conest splits the job across two products: SureCount counts drawing symbols, measures conduit and cable runs including elbows, boxes and vertical rises, and its Overlay feature shows added items in green and deleted items in red before feeding IntelliBid directly. A review published by McCormick Systems, a Conest competitor, counts that two-program structure as a cost because estimators learn two interfaces.

Price, reviews and the learning curve

STACK publishes its prices; Conest does not. STACK’s pricing page lists Premium at $299 and Pro at $349 per user per month, billed annually on 12-month terms, with 20% off for paying the year upfront and a free tier that drops to 1 active project a month after 7 days of Pro. On Pro, one estimator costs $349 × 12 months = $4,188 a year. Third-party listings disagree, though: TrustRadius shows a Start plan at $2,999 a year and a Grow plan at $5,499 a year, so confirm current figures with STACK before you budget.

Conest quotes by edition and number of users after a demo. SureCount has no published price either, and the McCormick review warns that tiered pricing and add-ons can raise total implementation cost. Ask for one quote covering everything: the IntelliBid edition, SureCount, Electrical Formulas and any pricing service.

Review volume is lopsided. Capterra reviewers rate IntelliBid 4.6 out of 5 across 24 reviews, with customer support at 4.7 and ease of use at 4.0, and one estimator with more than 2 years on it calls the setup steep but praises adjustable labor rates once configured. That same reviewer finds reporting and data extraction cumbersome. STACK’s Canadian Capterra listing shows 4.5 out of 5 from 1,395 reviews, where users praise the all-in-one design and complain about navigation, mouse-tracking miscounts, manual price imports and lag on large files.

The deployment tiebreaker

Hosting changes this comparison in one direction only. STACK is already a cloud application, so every estimator signs in through a browser and a second or third office needs no shared server, no VPN and no file sync. A second STACK office is just another login.

Browser delivery still has requirements. For Takeoff & Estimate, STACK’s support site recommends an Intel Core i5 or better with 8 GB of RAM and at least 20 Mbps down and 5 Mbps up, and on a Mac it officially supports only Safari 26 on macOS Tahoe, Sequoia or Sonoma. Older Safari breaks things. STACK says outdated versions can break features such as choosing a scale from the takeoff toolbar, its Project Cost Calculator needs Microsoft Excel 2010 or later, and the STACK Field App does not run on Macs unless Windows® is installed through Boot Camp or virtualization.

IntelliBid is the product hosting changes. Installed on one PC or an office network, its database lives in one building, and every other office needs remote access to it. CE Cloud removes that problem: Conest’s hosted edition of IntelliBid and SureCount runs on our infrastructure, reachable from Windows and Mac computers, Chromebooks, iPads and Android tablets, with multi-factor authentication and daily encrypted off-site backups among its listed security features.

Conest chose hosting over a rewrite. According to our Conest customer story, its on-premise code was not cloud-ready and a full rewrite was out of reach in time and resources, so the existing desktop software now runs on hosted cloud desktops. Setting up a new customer environment went from about an hour to minutes after the move. A desktop estimator can be cloud-delivered without being rebuilt.

For the setup details (licensing, sizing and what breaks), see our guide to running estimating software remotely. For how IntelliBid compares with five other electrical estimators on delivery, see the electrical estimating software guide.

Two verdicts

Scope picks the winner here, not features.

For an electrical contractor, in one office or several

Pick Conest IntelliBid. If every bid you send is electrical, low voltage, datacom or solar, the 140,000-plus material items, prebuilt assemblies and preinstalled labor units are setup work you skip, and Smart Substitution in the Plus edition checks swaps against the code as you go. Expect a learning curve. Get one written quote covering IntelliBid, SureCount and the add-ons you need, and if your estimators sit in more than one office, ask Conest about CE Cloud before you buy a server.

For a general contractor or multi-trade shop

Pick STACK. One browser-based tool across every trade beats a specialist estimator you would open for a single scope, and STACK’s published pricing, 1,395 Capterra reviews and links to QuickBooks, Sage and Acumatica make it easy to evaluate before you commit. Electrical scopes will need your own assemblies and labor rates. If you self-perform electrical work at volume, price that gap honestly, and test a large plan set early, since lag on big files is a recurring complaint.

Frequently asked questions

It works for electrical as one trade among many. STACK takes off plans and builds estimates from a general item and assembly library, but we found no NEC code database or electrical labor-unit library in its published material. A general contractor pricing electrical alongside other trades may find that enough. A contractor who bids only electrical work saves a lot of setup with IntelliBid’s preloaded data.

STACK’s own pricing page lists Premium at $299 and Pro at $349 per user per month, billed annually on 12-month terms, plus a free tier limited to 1 active project a month after 7 days of Pro. TrustRadius shows different plans at $2,999 and $5,499 a year, so confirm the current price with STACK.

Conest does not publish a price list. The quote depends on the edition (Standard, Plus or Pro) and the number of users, and SureCount takeoff is priced separately. Request a demo and ask for the full bundle in one quote, including any add-ons and supplier pricing services.

Yes, through CE Cloud. Conest says CE Cloud works from Windows and Mac computers, Chromebooks, iPads and Android tablets. A local install runs on a Windows PC or office network.

The scores are close; the volume is not. Capterra reviewers rate IntelliBid 4.6 out of 5 across 24 reviews, and STACK’s Canadian Capterra listing shows 4.5 out of 5 from 1,395 reviews. IntelliBid reviewers mention a steep setup; STACK reviewers mention navigation issues and lag on large files.

Not with CE Cloud. Conest’s hosted edition puts IntelliBid and SureCount in one cloud environment that every office reaches over the internet. A local install keeps the database in one office, so the others need remote access to it.

Next steps

Talk to Conest about IntelliBid

Conest is a V2 Cloud partner, and its CE Cloud edition of IntelliBid and SureCount runs on our platform. Bring a recent electrical bid to the demo.

Request an IntelliBid demo

Disclosure

V2 Cloud has a commercial partnership with Conest Software Systems, and Conest’s CE Cloud edition runs on our infrastructure. The comparison above draws on vendor documentation, published pricing and independent reviews, listed in the sources. STACK keeps the recommendation for general contractors and multi-trade shops that want one browser-based takeoff and estimating tool across every trade, with published pricing and a large review base.

Sources

Back to top

Still have questions?

Let us help you find the solution that fits your business.

Schedule a call
Your V2 CloudCare team — real people, on the line.
On a call now34s avg. pickup
SL FC AR MK +6

Your V2 CloudCare team — real people, on the line.